Regular public training courses available in Perth, Bunbury & Albany.

CTF funding available, saving up-to 80% off training.

Advanced Worksite Traffic Management (AWTM) Upgrade

Short CoursesCoursesQualifications
This one (1) day course provides participants with the theory and practical skills required to prepare detailed Traffic Management Plans including those in accordance with and up to the planning level specified in clause 2.2.1(c) of AS1742 Part 3 – 2009. The course is delivered face to face. This level of Main Roads WA accreditation is suited to Traffic Planners, Project Managers or Approving Officers.

Learning Outcomes

Design a TMP in accordance with the project brief, statutory and regulatory standards

Collect and analyse site information, data and conduct risk assessment, in order to prepare a TMP

Select and modify a TMP and TGS based on risk assessment to ensure a safe and effective worksite operation

Determine signs and devices including calculatin the spacing between signs, measure width of trafficable surface, edge clearances to barriers, cones and clearance to work personnel

Identify and obtain authorisations required including variation to standards

Determine speed environment, type and class of vehicles, sight lines, environmental conditions and surface type

Identify key stakeholders and prepare, advance notification requirements

Competencies

Upon successful completion, all participants will be issued by AusQ Training RTO 52361 with the following nationally recognised Statement of Attainments:

 RIICWD503E Prepare traffic management plans and traffic guidance schemes

AusQ Training is a Main Roads WA approved training provider therefore upon successful completion and meeting all the required Main Roads WA pre requisites participants will also receive a digital Main Roads WA Advanced Worksite Traffic Management (AWTM) accreditation (valid for 3 years).

Course Duration

Days Time
1 day 7:30 am – 4:00 pm please arrive 15 minutes prior course times

At the completion of classroom training, there is a requirement to complete additional two assignments. These assignments will involve design TMPs. Assignments are estimated to take between two to three days (or 16-24 hours) each to prepare and submit.

Pre Entry Requirements

Participants are required to:

Provide a Unique Student Identifier (USI)
Have good English literacy and reading skills as training will involve reading work instructions, interpreting traffic guidance schemes, designing Traffic Management Plans, writing safety safety documentation and compliance audit reports
Have good computer processing, internet and email skills

In order to meet Main Roads WA requirements, participants MUST:

Hold (or have held) an Australian Driver’s Licence
Have evidence of being issued with a valid Worksafe WA Construction Safety Awareness Training Card (blue card) or Construction Induction (White Card)
Hold a current Main Roads WA Basic Worksite Traffic Management (BWTM) accreditation
Hold a current Main Roads WA Worksite Traffic Management (WTM) accreditation
Hold Statement of Attainment in RIIWHS201D Work safely and follow WHS policies and procedures or equivalent
Hold Statement of Attainment in RIIRIS402D Carry out risk management process or equivalent
Have documentary evidence of at least 1 year practical experience in traffic management OR; have documentary evidence of at lest 2 year’s practical experience in road construction/maintenance
Details of a minimum of three (3) worksites with a supervisor’s contact details that can be verified. Details required to provide will include date of work, site location and suburb, description of works, contractor, and supervisor name and contact details
Completed and signed SWMS used on a worksite by the applicant
Minimum one (1) signed daily diary of a worksite you have implemented or details of the TMP number, contractor etc to be verified by the RTO
Documentary evidence of experience must include at least three (3) TMPs that the applicant has prepared, endorsed or approved that have been implemented at a worksite

The above listed requirements and evidence must be supplied with your enrolment. This is required to allow issuing of a Main Roads WA accreditation at the successful completion of the course.

Participants are also required to obtain and bring the below resources for training:

Main Roads WA Code of Practice for Works on Roads – February 2021
Main Roads WA Code of Practice for Events – February 2021(Free to download)
Australian Standard (AS1742.3 . 2019) Manual of Uniform Traffic Control Devices Part 3: Traffic Control for Works on Roads (Paid resource)
Austroads Guides – Part 2 Traffic Management Planning (Free to download)
Austroads Guides – Part 3 Static Worksites (Free to download) 6. Austroads Guides – Part 9 Sample Layouts (Free to download)

** This is a paid resource and will incur an additional cost to purchase and download this document. All other resources listed above are free to access and download. You will be required to create your own free Austroads account. More details on where and how to access these resources will be provided upon enrolling.

 

Costs

Metropolitan Rate $556 per person

Regional Rate $556 per personNo GST for Nationally Accredited Training.

Upcoming Training Dates

Group Bookings

Whether you need traffic management training for 1 to 500 people, basic to advanced training, delivered anywhere in Western Australia – we’ve got the capabilities to assist. If you would like us to travel to your workplace and provide training for a group of people, please take 2 minutes to complete our request form below.

By completing our request form, we will obtain details relating to your training requirements so we can better understand your needs. Once your response has been received we will prepare a formal quote and current availability options for your consideration.

Frequently Asked Questions (FAQs)

Have a question?

Please check out our full FAQs page, as you might find the answer you’re looking for instantly. There you’ll find answers to questions you didn’t even know you had! After that, feel free to reach out to our team and we’ll get back to you.

Over 10,000 Australians Trained

null

Our clients include construction and traffic management organisations across WA.

Testimonials

What Our Customers Say About Us

I choose AusQ Training for the assistance with providing a refresher course for my AWTM. They were able to offer flexibility of service. I would recommend others to AusQ Training within the construction industry seeking Traffic Management training services.

Robbie Cribbin

Project Manager - Downer

We reached out to AusQ Training as it is a contract requirement for our operators to obtain this license to perform works within 3m of a road. AusQ were able to offer the training the soonest. We now have the ability to expand the number of staff we can resource to serve our contract. I would recommend AusQ to others as it is fast access to training that meets requirements.

John Markby

Operations Manager - Phillip Best Plumbing

I would love to just let you know that my trainer was incredibly amazing and I would highly recommend them to everyone! The trainer was very professional throughout the whole training course and made the situation so interesting! Honestly could not rate them enough. They were just absolutely amazing and so approachable! It made doing this course very very fun and makes me want to do another course just to have them as a trainer again!!

Tyler Bond

Student - Private

Save Up To 80% Off Training Costs

null

Take our FREE Construction Training Fund (CTF) Eligibility Assessment and check if you qualify! Takes less than 2 minutes to complete and we will review your eligibility.

Menu